User`s guide

Vigor2910 Series User’s Guide
60
to Internet. You can use address mapping function to achieve this demand. Simply type
192.168.1.10 as the Private IP; and type 86.123.123.2 as the WAN IP.
Protocol Display the protocol used for this address mapping.
Public IP Display the public IP address selected for this entry, e.g.,
172.16.3.102.
Private IP Display the private IP set for this address mapping, e.g.,
192.168.1.10
Mask Display the subnet mask selected for this address mapping.
Status Display the status for the entry, enable or disable.
Click the index number link to open the configuration page.
Enable Check to enable this entry.
Protocol Specify the transport layer protocol. It could be TCP, UDP, or
ALL for selection.
WAN Interface Select WAN interface for such profile.
WAN IP Select an IP address (the selections provided here are set in IP
Alias List of Network >>WAN interface). Local host can use this