User`s guide

Vigor2910 Series User’s Guide
56
The inherent security properties of NAT are somewhat bypassed if you set up DMZ host. We
suggest you to add additional filter rules or a secondary firewall.
Click DMZ Host to open the following page:
WAN1 This page allows you to set Private IP or Active True IP as the
DMZ host.
Private IP If you choose Private IP as the selection for DMZ host, please
type in private IP or select any one by clicking the Choose PC
button.
MAC Address of the True
IP DMZ Host
If you choose Active True IP as the selection for DMZ host,
please type in MAC address in these fields.
If you previously have set up WAN IP Alias on WAN1 interface while configuring PPPoE,
Static or Dynamic IP or PPTP (by accessing into WAN>>Internet Access), you will find
them in Aux. WAN IP list for your selection.
Enable Check to enable the DMZ Host function.