User`s guide

Vigor2910 Series User’s Guide
113
Profile Name Type a name for such profile. The length of the file is
limited to 10 characters.
User Name This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPSec policy above.
Password This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPSec policy above.
Pre-Shared Key For IPSec/L2TP IPSec authentication, you have to type a
pre-shared key.
Confirm Pre-Shared Key Type the pre-shared key again for confirmation.
Digital Signature (X.509) In addition to pre-shared key, you can select one
predefined setting in the X.509 Peer ID Profiles (set from
VPN and Remote Access>>IPSec Peer Identity) for
IPSec/L2TP over IPSec authentication.
Peer IP/VPN Client IP Type the WAN IP address or VPN client IP address for
the remote client.
Peer ID Type the ID name for the remote client.
Remote Network IP Please type one LAN IP address (according to the real
location of the remote host) for building VPN connection.
Remote Network Mask Please type the network mask (according to the real
location of the remote host) for building VPN connection.
z When you check PPTP/L2TP (two types) or PPTP or L2TP with Policy (None), you
will see the following graphic: