User`s guide

Vigor2910 Series User’s Guide
109
Profile Name Type a name for such profile. The length of the file is
limited to 10 characters.
VPN Connection Through Use the drop down menu to choose a proper WAN
interface for this profile. This setting is useful for dial-out
only.
WAN1 First - While connecting, the router will use
WAN1 as the first channel for VPN connection. If
WAN1 fails, the router will use another WAN interface
instead.
WAN1 Only - While connecting, the router will use
WAN1 as the only channel for VPN connection.
WAN2 First - While connecting, the router will use
WAN2 as the first channel for VPN connection. If
WAN2 fails, the router will use another WAN interface
instead.
WAN2 Only - While connecting, the router will use
WAN2 as the only channel for VPN connection.
Always On Check to enable router always keep VPN connection.
Pre-Shared Key IKE Authentication Method usually applies to those are
remote dial-in user or node (LAN to LAN) which uses
dynamic IP address and IPSec-related VPN connections
such as L2TP over IPSec and IPSec tunnel.
Pre-Shared Key- Specify a key for IKE authentication
Confirm Pre-Shared Key-Confirm the pre-shared key.
Digital Signature (X.509) Check the box of Digital Signature to invoke this
function and select one predefined in the X.509 Peer ID