User Guide

Vigor2910 Series User’s Guide

For adding a new rule, click Add to open the following page.

ACT Check this box to invoke these settings.

Source Address Click the SrcEdit button to set the source address for the rule.

Destination Address Click the DestEdit button to set the destination address for the

rule.

SrcEdit/DestEdit It allows you to edit source address information.

Address Type – Determine the address type for the source

address.

For Single Address, you have to fill in Start IP address.

For Range Address, you have to fill in Start IP address and

End IP address.

For Subnet Address, you have to fill in Start IP address and

Subnet Mask.

DiffServ CodePoint All the packets of data will be divided with different levels

and will be processed according to the level type by the

system. Please assign one of the level of the data for

processing with QoS control.

Service Type It determines the service type of the data for processing with

QoS control. It can also be edited. You can choose the

predefined service type from the Service Type drop down list.

Those types are predefined in factory. Simply choose the one

that you want for using by current QoS.

By the way, you can set up to 20 rules for one Class. If you want to edit an existed rule,

please select the radio button of that one and click Edit to open the rule edit page for

modification.