User`s guide

Vigor2850 Series User’s Guide

Dest Port Start

Displays the IP address for the start of the destination port.

Dest Port End

Displays the IP address for the end of the destination port.

Move UP/Move Down

Use Up or Down link to move the order of the policy.

Click Index 1 to access into the following page for configuring load-balance policy.

Enable

Check this box to enable this policy.

Protocol

Use the drop-down menu to choose a proper protocol for the

WAN interface.

Binding WAN interface

Choose the WAN interface (WAN1 / WAN2 / WAN3) for

binding.

Auto failover to other WAN – Check this button to lead the

data passing through other WAN automatically when the

selected WAN interface is failover.

Src IP Start

Type the source IP start for the specified WAN interface.

Src IP End

Type the source IP end for the specified WAN interface. If this

field is blank, it means that all the source IPs inside the LAN

will be passed through the WAN interface.

Dest IP Start

Type the destination IP start for the specified WAN interface.

Dest IP End

Type the destination IP end for the specified WAN interface. If

this field is blank, it means that all the destination IPs will be

passed through the WAN interface.

Dest Port Start

Type the destination port start for the destination IP.

Dest Port End

Type the destination port end for the destination IP. If this field