User`s guide

Vigor2850 Series User’s Guide
20
Please click Next to open the following page. Select the appropriate Internet access type
according to the information from your ISP. For example, you should select PPPoE mode if
the ISP provides you PPPoE interface. In addition, the field of For ADSL Only will be
available only when ADSL is detected. Then click Next for next step.
2
2
.
.
4
4
.
.
1
1
.
.
1
1
P
P
P
P
P
P
o
o
E
E
PPPoE/PPPoA: PPPoE stands for Point-to-Point Protocol over Ethernet. It relies on two
widely accepted standards: PPP and Ethernet. It connects users through an Ethernet to the
Internet with a common broadband medium, such as a single DSL line, wireless device or
cable modem. All the users over the Ethernet can share a common connection.
PPPoE is used for most of DSL modem users. All local users can share one PPPoE connection
for accessing the Internet. Your service provider will provide you information about user name,
password, and authentication mode.
If you click PPPoE or PPPoA as the protocol, please manually enter the Username/Password
provided by your ISP. Then click Next.