User`s guide

Vigor2850 Series User’s Guide
252
Index Click this link to access into next page for setting SIP account.
Profile Display the profile name of the account.
Domain/Realm Display the domain name or IP address of the SIP registrar
server.
Proxy Display the domain name or IP address of the SIP proxy server.
Account Name Display the account name of SIP address before @.
Codec Display the codec type for the account.
Ring Port Specify which port will ring when receiving a phone call. Set
Phone, ISDN1-S0 or ISDN-TE as the default ring port for the
SIP account. If you choose Phone or ISDN1-S0, the ISDN2-TE
selection will be dimmed, vice versa. There are ten internal
lines with numbers (30 – 39) offered for ISDN-S0. You can
specify any one of them as ring port for specified SIP account.
By the way, ISDN-S0 can be used by mapping with MSN
numbers.
Status Show the status for the corresponding SIP account. R means
such account is registered on SIP server successfully. – means
the account is failed to register on SIP server.
STUN Server Type in the IP address or domain of the STUN server.
External IP Type in the gateway IP address.
SIP PING interval The default value is 150 (sec). It is useful for a Nortel server
NAT Traversal Support.
Click any index link to access into the following page for configuring SIP account.