User`s guide

Vigor2850 Series User’s Guide
230
Profile Name
Specify a name for the profile of the LAN-to-LAN connection.
Enable this profile
Check here to activate this profile.
VPN Dial-Out Through
Use the drop down menu to choose a proper WAN interface for
this profile. This setting is useful for dial-out only.
WAN1 /WAN2 /WAN3 First - While connecting, the router
will use WAN1 /WAN2 /WAN3 as the first channel for VPN
connection. If WAN1 fails, the router will use another WAN
interface instead.
WAN1 /WAN2 /WAN3 Only - While connecting, the router
will use WAN1 /WAN2 /WAN3 as the only channel for VPN
connection.
Netbios Naming Packet
Pass – click it to have an inquiry for data transmission between