User`s guide

Vigor2850 Series User’s Guide
193
To activate the function of limit session, simply click Enable and set the default session limit.
Enable
Click this button to activate the function of limit session.
Disable
Click this button to close the function of limit session.
Default session limit
Defines the default session number used for each computer in
LAN.
Limitation List
Displays a list of specific limitations that you set on this web
page.
Start IP
Defines the start IP address for limit session.
End IP
Defines the end IP address for limit session.
Maximum Sessions
Defines the available session number for each host in the
specific range of IP addresses. If you do not set the session
number in this field, the system will use the default session
limit for the specific limitation you set for each index.
Default Message – Click this box to display the default
message.
Add
Adds the specific session limitation onto the list above.
Edit
Allows you to edit the settings for the selected limitation.
Delete
Remove the selected settings existing on the limitation list.
Administration Message
Type the words which will be displayed when reaches the
maximum number of Internet sessions permitted.
Click Default Message to display the default message on the
screen.
Index (1-15) in Schedule
Setup
You can type in four sets of time schedule for your request. All
the schedules can be set previously in Application >>
Schedule web page and you can use the number that you have
set in that web page.