User`s guide

Vigor2850 Series User’s Guide
151
Sessions Control
The number typed here is the total sessions of the packets that
do not match the filter rule configured in this page. The
default setting is 60000.
Quality of Service
Choose one of the QoS rules to be applied as firewall rule.
For detailed information of setting QoS, please refer to the
related section later.
Load-Balance Policy
Choose the WAN interface for applying Load-Balance Policy.
User Management
Such item is available only when Rule-Based is selected in
User Management>>General Setup. The general firewall
rule will be applied to the user/user group/all users specified
here.
Note: When there is no user profile or group profile
existed, Create New User or Create New Group item
will appear for you to click to create a new one.
APP Enforcement
Select an APP Enforcement profile for global IM/P2P
application blocking. If there is no profile for you to select,
please choose [Create New] from the drop down list in this
page to create a new profile. All the hosts in LAN must
follow the standard configured in the APP Enforcement
profile selected here. For detailed information, refer to the
section of APP Enforcement profile setup. For
troubleshooting needs, you can specify to record information
for IM/P2P by checking the Log box. It will be sent to Syslog
server. Please refer to section Syslog/Mail Alert for more
detailed information.
URL Content Filter
Select one of the URL Content Filter profile settings
(created in CSM>> URL Content Filter) for applying with
this router. Please set at least one profile for choosing in
CSM>> URL Content Filter web page first. Or choose
[Create New] from the drop down list in this page to create a
new profile. For troubleshooting needs, you can specify to
record information for URL Content Filter by checking the