User`s guide

Vigor2850 Series User’s Guide
146
Protocol Display the protocol used for this address mapping.
Public IP Display the public IP address selected for this entry, e.g.,
172.16.3.102.
Private IP Display the private IP set for this address mapping, e.g.,
192.168.1.10
Mask Display the subnet mask selected for this address mapping.
Status Display the status for the entry, enable or disable.
Click the index number link to open the configuration page.
Enable Check to enable this entry.
Protocol Specify the transport layer protocol. It could be TCP, UDP, or ALL
for selection.
WAN Interface Choose the WAN interface for such address mapping profile.
WAN IP Select an IP address (the selections provided here are set in IP Alias
List of Network >>WAN interface). Local host can use this IP to
connect to Internet.
If you want to choose any one of the Public IP settings, you must