User`s guide

Vigor2850 Series User’s Guide
99
Priority – Type the packet priority number for such VLAN.
The range is from 0 to 7.
Active Mode
Choose Always On to make the WAN1 connection being
activated always;
Backup WAN
If you choose Backup as the Active Mode, Backup WAN will
be changed into Backup Type. You have to specify which role
the WAN interface should play if you want to backup multiple
WANs. However, ignore this setting if you want to backup a
single WAN.
When any WAN disconnect – Such backup WAN will be
activated when any master WAN interface disconnects.
When all WAN disconnect – Such backup WAN will be
activated only when all master WAN interfaces disconnect.
W
W
A
A
N
N
3
3
w
w
i
i
t
t
h
h
U
U
S
S
B
B
To use 3G network connection through 3G USB Modem, please configure WAN3 interface.
Enable
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Display Name
Type the description for such WAN interface.
Physical Mode
Display the physical mode of such WAN interface.
Physical type
In such WAN interface, no type can be selected.
Line Speed
If your choose According to Line Speed as the Load Balance
Mode, please type the line speed for downloading and
uploading for such WAN interface. The unit is kbps.