User`s guide
Table Of Contents
- Table of Contents
- 1. Preface
- 2. Initial Configuration
- 3. Advanced Configuration
- 4. Application and Examples
- 4.1 How to Configure Multi-Subnet in Vigor2830
- 4.2 How Can I Use FTP to Get the Files from USB Storage DeviceConnecting to Vigor Router?
- 4.3 How to Send out SMS via Vigor Router
- 4.4 Web Portal Log-In Application for Wireless Client
- 4.5 How to Customize Your Login Page
- 4.6 Create a LAN-to-LAN Connection Between Remote Officeand Headquarter
- 4.7 Create a Remote Dial-in User Connection Between theTeleworker and Headquarter
- 4.8 QoS Setting Example
- 4.9 Upgrade Firmware for Your Router
- 4.10 Request a certificate from a CA server on Windows CAServer
- 4.11 Request a CA Certificate and Set as Trusted on WindowsCA Server
- 4.12 Creating an Account for MyVigor
- 5. Trouble Shooting
- 5.1 Checking If the Hardware Status Is OK or Not
- 5.2 Checking If the Network Connection Settings on YourComputer Is OK or Not
- 5.3 Pinging the Router from Your Computer
- 5.4 Checking If the ISP Settings are OK or Not
- 5.5 Problems for 3G Network Connection
- 5.6 Backing to Factory Default Setting If Necessary
- 5.7 Contacting Your Dealer
Vigor2830 Series User’s Guide
70
Click Index 1 to access into the following page for configuring load-balance policy.
Available settings are explained as follows:
Item Description
Enable
Check this box to enable this policy.
Protocol
Use the drop-down menu to choose a proper protocol for
the WAN interface.
Binding WAN interface
Choose the WAN interface (WAN1/WAN2/WAN3) for
binding.
Auto failover to other WAN – Check this button to lead
the data passing through other WAN automatically when
the selected WAN interface is failover.
Src IP Start
Type the source IP start for the specified WAN interface.
Src IP End
Type the source IP end for the specified WAN interface. If
this field is blank, it means that all the source IPs inside the
LAN will be passed through the WAN interface.
Dest IP Start
Type the destination IP start for the specified WAN
interface.
Dest IP End
Type the destination IP end for the specified WAN
interface. If this field is blank, it means that all the
destination IPs will be passed through the WAN interface.
Dest Port Start
Type the destination port start for the destination IP.
Dest Port End
Type the destination port end for the destination IP. If this
field is blank, it means that all the destination ports will be
passed through the WAN interface.