User`s guide

Vigor2820 Series User’s Guide
139
Profile Name Specify a name for the profile of the LAN-to-LAN connection.
Enable this profile Check here to activate this profile.
Netbios Naming Packet Pass – click it to have an inquiry for data transmission between
the hosts located on both sides of VPN Tunnel while connecting.
Block – When there is conflict occurred between the hosts on
both sides of VPN Tunnel in connecting, such function can
block data transmission of Netbios Naming Packet inside the
tunnel.
VPN Dial-Out Through Use the drop down menu to choose a proper WAN interface for
this profile. This setting is useful for dial-out only.
WAN1 First - While connecting, the router will use WAN1 as
the first channel for VPN connection. If WAN1 fails, the router
will use another WAN interface instead.