User`s guide

Vigor2820 Series User’s Guide
58
P
P
P
P
P
P
f
f
o
o
r
r
W
W
A
A
N
N
2
2
Such mode is active only 3G USB Modem was chosen as the physical mode in General Setup.
PPP Client Mode
Click Enable to activate this mode for WAN2.
SIM PIN code
Type PIN code of the SIM card that will be used to access Internet.
Modem Initial String
Such value is used to initialize USB modem. Please use the default
value. If you have any question, please contact to your ISP.
APN Name
APN(Access Point Name) is provided by your ISP for identifying
different access points. Simply click Apply to apply such name.
Finally, you have to click OK to save the setting.
Apply – Activate the function of identification.
Modem Dial String
Such value is used to dial through USB mode. Please use the
default value. If you have any question, please contact to your ISP.
PPP Username
Type the PPP username (optional).
PPP Password
Type the PPP password (optional).
Index (1-15)
Set the PCs on LAN to work at certain time interval only. You
may choose up to 4 schedules out of the 15 schedules pre-defined
in Applications >> Schedule setup. The default setting of this filed
is blank and the function will always work.