User`s guide

Vigor2820 Series User’s Guide
133
For adding a new rule, click Add to open the following page.
ACT
Check this box to invoke these settings.
Local Address
Click the Edit button to set the local IP address (on LAN) for the
rule.
Remote Address
Click the Edit button to set the remote IP address (on
LAN/WAN) for the rule.
Edit
It allows you to edit source address information.
Address Type – Determine the address type for the source
address.
For Single Address, you have to fill in Start IP address.
For Range Address, you have to fill in Start IP address and End
IP address.
For Subnet Address, you have to fill in Start IP address and
Subnet Mask.
DiffServ CodePoint
All the packets of data will be divided with different levels and
will be processed according to the level type by the system.
Please assign one of the levels of the data for processing with