User`s guide

Vigor2760 Series User’s Guide

In Bridge mode, the router will connect to up to four Vigor2760 which use the same mode,

and all wired Ethernet clients of every Vigor2760 will be connected together. You can use this

mode to connect a network to other networks which is physically isolated. Please note that

when you set to this mode, Vigor2760 will not accept regular wireless clients anymore.

In Repeater mode, the router will connect to up to four Vigor2760 which use the same mode,

and all wired Ethernet clients of every Vigor2760 will be connected together. You can use this

mode to connect a network to other networks which is physically isolated. When you use this

mode, this access point is still able to accept wireless clients.

Open Wireless LAN>>WDS to open the following page. It allows you to enable the WDS

setting, specify WDS mode (Bridge or Repeater) and modify the WDS settings.

Available parameters are listed below:

Item Description

Enable

Check this box to enable WDS setting.

Mode

Choose the mode for WDS setting. Bridge mode is designed

to fulfill the first type of application. Repeater mode is for the

second one.

WDS

Name –Display the name of the WDS profile. Such name is

assigned by the router in default.

Enable –Display the activation status for such interface.

z Enable – The profile is activated.

z Disable –The profile is not activated.

Peer MAC Address - Display the MAC address of the peer.

Apply

Click it to save the settings.

Reset

Click it to retrieve the default settings of this page.

Refresh

Click it to clear current settings and return to the settings

saved previously.

To edit a WDS profile, please do the following:

1. Move your mouse cursor on the WDS profile (from WDS1 to WDS4) you want to edit

and click on it. In this case, we choose WDS2.