User`s guide

Vigor2760 Series User’s Guide
67
2. The following page appears.
Available parameters are listed below:
Item Description
Interface
Choose an interface for applying the QoS function.
Outbound QoS
Check the box to make the outgoing traffic following the
limitation specified in this page.
Outbound
Bandwidth
Type the transmission rate to limit the outgoing traffic.
Outbound Borrow
Bandwidth
Check this box to enable the bandwidth borrowed by other
clients.
When a client in LAN needs more bandwidth for data
transmission, the reserved bandwidth can be used
temporarily by the client in request if there is no other client
occupying the bandwidth.
Outbound QoS Class
Specify the value for Low, Normal, Medium and High. High
class means it owns the highest priority. Usually it will
occupy the most of the bandwidth ratio.
Apply
Click it to save the settings.
Clear
Click it to remove the modification of the web page.
Cancel
Click it to return to previous web page.
3. After finished the settings above, click Apply to save the settings.