User`s guide

Vigor2760 Series User’s Guide
62
To add a static route profile, please do the following:
1. Click Add.
2. The following page appears.
Available parameters are listed below:
Item Description
Enable
Check the box to enable such profile.
Name
Type a name for such profile.
Destination IP
Address/Mask
Type the IP address of the destination. All the packets into
such IP address will be forwarded to the gateway specified in
this page.
Interface
Choose an interface for the static route.
Gateway
Type an IP address of the other router. All packets destined
to destination IP address/mask will be forwarded to the
gateway specified here.
Apply
Click it to save the settings.
Clear
Click it to remove the modification of the web page.
Cancel
Click it to return to previous web page.