User`s guide

Vigor2760 Series User’s Guide
61
4
4
.
.
1
1
.
.
5
5
.
.
2
2
S
S
t
t
a
a
t
t
i
i
c
c
R
R
o
o
u
u
t
t
e
e
When you have several subnets in your LAN, sometimes a more effective and quicker way for
connection is the Static route function rather than other method. You may simply set rules to
forward data from one specified subnet to another specified subnet without the presence of
RIP.
This page allows you to create several static routes to be selected for the route. Click
Network>>Static Route>>Static Route to get the following page:
Each item will be explained as follows:
Item Description
Add
Create new NAT profiles.
Edit
Edit the selected NAT profile.
To edit the profile, simply check the profile box you want to
edit and then click this button.
Delete
Remove the selected NAT profile.
Reset
Click it to rest to factory default settings.
Refresh
Click it to refresh the web page.
Enable
Display the activation status for such interface.
Enable – The profile is activated.
Disable –The profile is not activated.
Name
Display the profile name for the static route.
Destination IP
Address/Mask
Display the destination address/mask of the static route.
Interface
Display the interface that such static route uses.
Gateway
Display the IP address receiving the packets from destination
IP address/mask.