User`s guide

Vigor2760 Series User’s Guide

3. After finished the settings above, click Apply to save the settings then click Cancel to

return to previous page.

DHCP stands for Dynamic Host Configuration Protocol. DHCP allows a user to obtain an IP

address automatically from a DHCP server on the Internet.

The router by factory default acts a DHCP server for your network so it automatically dispatch

related IP settings to any local user configured as a DHCP client. It is highly recommended

that you leave the router enabled as a DHCP server if you do not have a DHCP server for your

network.

At least, one profile must be kept in this page. If you just want to have the default profile,

note that do not disable the default LAN_DHCP profile, otherwise, the system may not

run well.

Available parameters are listed below:

Item Description

Add

Create new DHCP profiles.

Edit

Edit the selected DHCP profile.

To edit the profile, simply check the profile box you want to

edit and then click this button.

Delete

Remove the selected DHCP profile.

Refresh

Click it to refresh the web page.

Enable

Display the activation status for such interface.

Enable – The DHCP profile is activated.

Disable –The DHCP profile is not activated.

Name

Display the profile name for DHCP.

Interface

Display the interface of such DHCP profile.