User`s guide

Vigor2760 Series User’s Guide
44
2. The following setting page will appear.
Available parameters are listed below:
Item Description
Enable
Check the box to enable such profile.
Name
Type a name for such profile.
Description
If required, type brief description for such profile.
Bridge Profile Type
Please select which type of DSL network this bridge will
connect to. The bridge interface will operate only when the
configuration here matches the current DSL mode of the
Vigor router.
ADSL – Choose it to configure the settings specified for
ADSL.
VDSL – Choose it to configure the settings specified for
VDSL.
Note that the type you choose will result in different web
settings offered by this web page.
ADSL_Mode
This setting is available when ADSL is chosen as Profile
Type.
VPI - Stands for Virtual Path Identifier. It is an 8-bit
header inside each ATM cell that indicates where the cell
should be routed. The ATM, is a method of sending data in
small packets of fixed sizes. It is used for transferring data to
client computers.
VCI - Stands for Virtual Channel Identifier. It is a 16-bit
field inside ATM cell’s header that indicates the cell’s next
destination as it travels through the network. A virtual
channel is a logical connection between two end devices on
the network.