User`s guide

Vigor2760 Series User’s Guide
19
Connection Type
Select a connection mode for this WAN interface.
PPP: if you click PPP as the protocol, please manually type the Username/Password and
type the values for ADSL settings (it can be ignored if VDSL service is offered) provided
by your ISP. Then click Finish to complete the configuration.
Available parameters are listed as follows:
Item Description
Username
Assign a specific valid user name provided by the ISP.
Password
Assign a valid password provided by the ISP.
Confirm Password
Type the password again for confirmation.
VPI
Stands for Virtual Path Identifier. It is an 8-bit header
inside each ATM cell that indicates where the cell should be
routed. The ATM, is a method of sending data in small
packets of fixed sizes. It is used for transferring data to client
computers.
VCI
Stands for Virtual Channel Identifier. It is a 16-bit field
inside ATM cell’s header that indicates the cell’s next
destination as it travels through the network. A virtual
channel is a logical connection between two end devices on
the network.
Connection Type
Select a connection mode for this WAN interface.