User`s guide

Vigor2760 Series User’s Guide
18
6. Type the router name and choose the protocol (PPP, Static IP or DHCP) according to the
information from your ISP. For example, you should select PPP mode if the ISP provides
you PPP interface. Then, click the Next button for next page.
Static IP: if you click Static IP, you will get the following page. Please type in the IP
address information and type the values for ADSL settings (it can be ignored if VDSL
service is offered) originally provided by your ISP. Then click Finish to complete the
configuration.
Available parameters are listed as follows:
Item Description
IP Address
Type the IP address.
Subnet Mask
Type the subnet mask.
Gateway
Type the gateway IP address.
DNS Address
Type in the primary IP address for the router.
VPI
Stands for Virtual Path Identifier. It is an 8-bit header
inside each ATM cell that indicates where the cell should be
routed. The ATM, is a method of sending data in small
packets of fixed sizes. It is used for transferring data to client
computers.
VCI
Stands for Virtual Channel Identifier. It is a 16-bit field
inside ATM cell’s header that indicates the cell’s next
destination as it travels through the network. A virtual
channel is a logical connection between two end devices on
the network.