User`s guide

Vigor2760 Series User’s Guide
194
default CPE username and password are "vigor" and "password". You will need it when you
configure VigorACS server.
Available parameters are listed below:
Item Description
Enable
Check the box to enable TR-069 parameters. Such data must
be typed according to the ACS (Auto Configuration Server)
you want to link. Please refer to VigorACS user’s manual for
detailed information.
ACS Server URL
Type the URL for VigorACS server.
If the connected CPE needs to be authenticated, please set
URL as the following and type username and password for
VigorACS server:
http://{IP address of
VigorACS}:8080/ACSServer/services/ACSServlet
If the connected CPE does not need to be authenticated
please set URL as the following:
http://{IP address of
VigorACS}:8080/ACSServer/services/UnAuthACSSe
rvlet
Username/Password - Type username and password for
ACS Server for authentication.
ACS Server Username
Type the username for ACS Server for authentication. For
example, if you want to use such CPE with VigorACS, you
can type as the following:
Username: acs
Password: XXXXXX
ACS Server Password
Type the password for ACS Server for authentication.
For example, if you want to use such CPE with VigorACS,