User`s guide

Vigor2760 Series User’s Guide
141
2. The following setting page will appear.
Available parameters are listed below:
Item Description
Name
Type a name for the RADIUS server.
Server IP Address
Type the IP address of RADIUS server
Port
The UDP port number that the RADIUS server is using. The
default value is 1812, based on RFC 2138.
Server Password
The RADIUS server and client share a password that is used
to authenticate the messages sent between them. Both sides
must be configured to use the same password.
Confirm Server
Password
Re-type the password for confirmation.
Apply
Click it to save the settings.
Clear
Click it to remove the modification of the web page.
Cancel
Click it to return to previous web page.