User`s guide

Vigor2760 Series User’s Guide
109
Start/End Source
Port
Source Port and the Destination Port column are available
for TCP/UDP protocol. It can be ignored for other protocols.
Type the port values for both start source port and end
source port respectively.
Start/End
Destination Port
Type the port values for both start destination port and end
destination port respectively.
Application
Specify the type of the service object. It will influence the
effect of the firewall setting. For example, the URL Content
Filter and Web Content Filter will run only when HTTP is
selected in such field. If you choose None, then UCF and
WCF will not run normally.
Apply
Click it to save the settings.
Clear
Click it to remove the modification of the web page.
Cancel
Click it to return to previous web page.
3. After finished the settings above, click Apply to save the file and wait for the following
dialog appears.