User`s guide

Vigor2710 Series User’s Guide
249
DECT phone access
mode
When registering with DECT phone, you will be asked to type
access code. The default setting in Vigor2710VDn is 1234.
Enable Registration
Mode
If you want to use handset to register with the router, you need
to enable DECT module registration mode via this button.
Otherwise, you can't search our DECT base station from the
air.
Deregister All Handset
Deregister all registered handset.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
:
:
Vigor 2710 VDn provides a DECT GAP/CAT-iq base module, which can facilitate 4
simultaneous wireless audio connections and 6 phone registrations.
1. Open VoIP>>DECT.
Note: DECT menu will appear if DECT module is detected.
2. In the web page, please click Enable Registration Mode and wait for DECT handset
to register.