User`s guide

Vigor2710 Series User’s Guide
248
4
4
.
.
1
1
1
1
.
.
4
4
D
D
E
E
C
C
T
T
From this page, you can enable register or deregister handsets for using DECT function.
Available settings are explained as follows:
Item Description
Refresh Seconds
Specify the interval of refresh time to obtain the latest VoIP
calling information. The information will update immediately
when the Refresh button is clicked.
Handset
After DECT phone registered with router, it would be assigned
one unique handset ID.
Status
It is used to indicate the DECT handset status. For example, if
you have registered with router DECT module, you would
get – F00_REGISTERED_IDLE. If you get one incoming
call for this DECT handset, you would see -
F07_CALL_RECEIVED.
PCM Channel
This field can distinguish which PCM channel is used by
the handset. 255 (default setting) means it is idle and voice
data is not transferred through any PCM channel.
Deregister Handset
If your handset has registered to the router, you could use this
button to deregister it from router.
Wideband Voice
Check this box to enable the function to avoid hearing noisy
voice.
Ring Handset
Check this box to enable the function.