User`s guide

Vigor2710 Series User’s Guide
211
Item Description
Local ID (optional)- Specify a local ID to be used for
Dial-in setting in the LAN-to-LAN Profile setup. This item is
optional and can be used only in IKE aggressive mode.
After finishing all the settings here, please click OK to save the configuration.
4
4
.
.
9
9
.
.
6
6
L
L
A
A
N
N
t
t
o
o
L
L
A
A
N
N
Here you can manage LAN-to-LAN connections by maintaining a table of connection
profiles. You may set parameters including specified connection direction (dial-in or
dial-out), connection peer ID, connection type (VPN connection - including PPTP, IPSec
Tunnel, and L2TP by itself or over IPSec) and corresponding security methods, etc.
The router supports 2 VPN tunnels and provides up to 32 profiles simultaneously. The
following figure shows the summary table.
Each item is explained as follows:
Item Description
View
All – Click it to display the LAN to LAN profiles.
Trunk – Click it to display the Trunk profiles.
Set to Factory Default
Click to clear all indexes.
Name
Indicate the name of the LAN-to-LAN profile. The
symbol ??? represents that the profile is empty.
Active
Check the box to enable the selected profile.