User`s guide

Vigor2710 Series User’s Guide
9
Interface Description
WLAN
Press the button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
DSL Connector for accessing the Internet through ADSL2/2+.
LAN (1-4) Connectors for local networked devices.
USB Connector for USB storage (Pen Driver/Mobile HD) or
printer.
Interface Description
Line Connector for PSTN life line.
Phone
Connector of analog phone for VoIP communication
.
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the
hole and keep for more than 5 seconds. When you see the ACT LED begins to blink
rapidly than usual, release the button. Then the router will restart with the factory default
configuration.
PWR Connector for a power adapter.
ON/OFF
Power Switch.