User`s guide

Vigor2710 Series User’s Guide
158
2. Click the number under Index column for settings in detail.
Available settings are explained as follows:
Item Description
Name
Type a name for this profile.
Protocol
Specify the protocol(s) which this profile will apply to.
Source/Destination
Port
Source Port and the Destination Port column are available
for TCP/UDP protocol. It can be ignored for other protocols.
The filter rule will filter out any port number.
(=) – when the first and last value are the same, it indicates
one port; when the first and last values are different, it
indicates a range for the port and available for this profile.
(!=) – when the first and last value are the same,
it indicates
all the ports except the port defined here; when the first
and
last values are different, it indicates that all the ports
except the range defined here are available for this service
type.
(>) – the port number greater than this value is available.
(<) – the port number less than this value is available for this
profile.
3. After finishing all the settings here, please click OK to save the configuration. Below is
an example of service type objects settings.