User`s guide

Vigor2710 Series User’s Guide
127
Each item is explained as follows:
Item Description
Enable Open Ports
Check to enable this entry.
Comment
Make a name for the defined network application/service.
WAN IP
Specify the WAN IP address that will be used for this entry.
This setting is available when WAN IP Alias is configured.
Local Computer
Enter the private IP address of the local host or click Choose
PC to select one.
Choose PC - Click this button and, subsequently, a window
having a list of private IP addresses of local hosts will
automatically pop up. Select the appropriate IP address of the
local host in the list.
Protocol
Specify the transport layer protocol. It could be TCP, UDP, or
----- (none) for selection.
Start Port
Specify the starting port number of the service offered by the
local host.
End Port
Specify the ending port number of the service offered by the
local host.
After finishing all the settings here, please click OK to save the configuration.