Installation guide

Vigor 2710 Series Quick Start Guide
6
1
1
.
.
1
1
.
.
3
3
F
F
o
o
r
r
V
V
i
i
g
g
o
o
r
r
2
2
7
7
1
1
0
0
V
V
n
n
LED Status Explanation
Blinking The router is powered on and running
normally.
ACT
(Activity)
Off The router is powered off.
On Wireless access point is ready. WLAN
Blinking It will blink while wireless traffic goes
through.
On The router is ready to access Internet
through DSL link.
DSL
Blinking Slowly: The modem is ready.
Quickly: The connection is training.
On The port is connected.
Off The port is disconnected.
LAN 1/2/3/4
Blinking The data is transmitting.
On A USB device is connected and active.USB
Blinking The data is transmitting.
On The phone connected to this port is
off-hook.
Off The phone connected to this port is
on-hook.
Phone1/
Phone2
Blinking A phone call comes.
On A PSTN phone call comes (in and out).
However, when the phone call is
disconnected, the LED will be off
about six seconds later.
Line
Off There is no PSTN phone call.
On The WPS is on.
Off The WPS is off.
WPS
Blinking Waiting for wireless client sending
requests for connection about two
minutes.
On Press this button for 2 seconds to wait
for client device making network
connection through WPS. When the
LED lights up, the WPS will be on.
Off The WPS is off.
WPS Button
Blinking Waiting for wireless client sending
requests for connection about 2
minutes.
Interface Description
WLAN
Press the button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
DSL Connector for accessing the Internet through
ADSL2/2+.
LAN (1-4) Connectors for local networked devices.
USB Connector for USB storage (Pen Driver/Mobile
HD) or printer.