Installation guide

The Vigor2300 router provides many built-in server and

software features to provide a convenient comprehensive solution

for your SOHO network.

For DSL

users, the router has a built-in PPPoE client for establishing a

connection with the ISP. There is no need to install a further PPPoE

driver on your computers.

Some DSL

modems (e.g. Alcatel modems) only provide a PPTP local connection

for an end user computer. The router has a built-in PPTP client for

establishing a connection for your local network. There is no need to

install a PPTP client driver on your computers.

In most

cable modem environments, the router supports a DHCP client on the

WAN port. They can automatically get IP network settings from a cable

head-end access server.

For most dynamic IP users, the client

can update the WAN IP address to the registered DDNS provider when

the WAN IP has been changed.

For the router, the

client can get network time information from the specfied time server

and provide a time base for call scheduling usage.

WAN Features

Point-to-Point Protocol over Ethernet (PPPoE) Client:

Point-to-Point Tunnelling Protocol (PPTP) Client:

Dynamic Host Configuration Protocol (DHCP) Client:

Dynamic DNS (DDNS) Client:

Simple Network Time Protocol (SNTP) Client:

1.4 Detailed Features