User`s guide

Vigor2130 Series User’s Guide
88
Available settings are explained as follows:
Item Description
PPPoE Setting
Username - Type the name obtained from the ISP.
Password - Type the password obtained from the ISP.
Confirm Password -Type the password again for
confirmation.
MTU Size - It means Max Transmit Unit for packet. The
default setting will be specified by the system
automatically. Therefore, keep this field in blank.
Mail/SMS Alert
Alert Types – Specify the type of the alert (mail, SMS, or
Mail and SMS) that Vigor system will use to send a
message to the user.
Event types – Specify the event when the system must send
a notification to the user by mail and/or SMS.
After finishing all the settings here, please click OK to activate them.
4
4
.
.
1
1
.
.
3
3
P
P
o
o
r
r
t
t
s
s
Ports page is used to change the setting for WAN port. You can set or reset the following
items. All of them are described in detail below.
Available settings are explained as follows:
Item Description
Port
It displays current network interface.
Link
It displays current connection status. Green light means the
WAN connection is successful.
Speed
Current - It displays current speed that the router uses.
Configured - You can use the drop down list to choose the
required speed for the router. If you have no idea in
configuring speed, simple use the default setting, Auto.