User`s guide

Vigor2130 Series User’s Guide
171
A
A
d
d
d
d
i
i
n
n
g
g
a
a
N
N
e
e
w
w
U
U
s
s
e
e
r
r
1. Click Add a New User to open the following page.
Available settings are explained as follows:
Item Description
Enable
Check this box to enable such user profile.
Username
Type a name for this user.
Full Name
Type full name for this user.
Password
Type the password for this user.
Confirm Password
Type the password again for confirmation.
Allow Disk Sharing
Check this box to have the remote user share the disk
information.
Allow IPSEC/L2TP
Check this box to let the remote user connecting to this
device through IPSEC/L2TP.
Allow PPTP
Check this box to let the remote user connecting to this
device through PPTP.
When such user profile needs to have PPTP LAN to LAN
connection, the following three items must be adjusted.
Allowed Dial-In Type – Specify the type (Remote Dial-In
Client / LAN to LAN) for PPTP connection.
Assign Static IP Address – Type a static IP address if
remote Dial-In Client is selected as Dial-In Type.
Local Network / Mask –Traffic between this subnet and
the subnet specified in Remote Network / Mask will travel
through the VPN tunnel. Type the address(es) if LAN to
LAN is selected as Dial-In Type.
Remote Network / Mask –Add a static route to direct all