Installation guide

4-8
Remote Access
The following sections are based on the network layout above to de-
scribe how to set up a LAN-to-LAN profile to connect two private net-
works. In the above network layout, the private network of the head
office is 192.168.1.0/24 and the off-site branch office network is
192.168.2.0/24.
Before you begin to setup a LAN-to-LAN profile for each network, you
should gather the information shown in the following table.
eciffOdaeHeciffOhcnarB
DIkrowteN42/0.1.861.29142/0.2.861.291
ksamten/sserddaPIretuoR42/1.1.861.29142/1.2.861.291
noitcennocni-laidrofPIdengissA002.1.861.291002.2.861.291
tnuoccAsseccA
daeh:NU
daeh:WP
hcnarb:NU
hcnarb:WP
rebmunenilNDSI00010002
noitcnuFkcabllaCelbasiDelbasiD
4.3.1 Activating the Remote Dial-In Capability
In the Quick Setup group of the Setup Main Menu, click "Remote Dial-
In Access Setup" to enter the setup page. See 4.2 Remote Dial-In
Access for a full explanation of the fields on this page.