Installation guide

8-7
Troubleshooting & FAQ
The above example shows detailed D-channel SETUP messages only.
Note that all ISDN D-channel messages will be displayed when you
type the log -i -t command. To use the command, you will get to know
whether the ISDN connection could be established or not. Note that if
you cannot read the details, please save these messages in file and
attach to support technician.
8.4 Viewing PPP Logs
To view PPP logs, type "log -p".
The steps are:
1. Login to the Telnet terminal.
2. Type "log -F w" to clear all PPP logs.
3. Ping to any outside host to trigger the router to dial from your
PC.
4. Type "log -p" to display the latest PPP log. To display all
PPP logs, use the "log -p -t" command.