Installation guide

7-9
System Management
it will show PPPoE, PPTP, or Static IP depending on which
access mode is enabled. If the connection is idle, it will show
"- - -".
WAN IP Address: The WAN IP address for the active connec-
tion.
Dial PPPoE or PPTP: Click to force the router to establish a
PPPoE or PPTP connection.
Drop PPPoE or PPTP: Click to force the router to disconnect
the current active PPPoE or PPTP connection.
Triggered Dial-out Packet Header:
Triggered Dial-out Packet Header shows the last IP packet header
that triggers the router to dial out.
Refresh: Click to reload the page.
View Routing Table:
Click View Routing Table to view the router's routing table.