User`s guide

Vigor130 Series User’s Guide
119
Default Ports - Check to use standard port numbers for the
Telnet and HTTP servers.
SNMP
Enable SNMP Agent - Check it to enable this function..
Get Community - Set the name for getting community by
typing a proper character. The default setting is public.
Set Community - Set community by typing a proper name.
The default setting is private.
Manager Host IP - Set one host as the manager to execute
SNMP function. Please type in IPv4 address to specify
certain host.
Trap Community - Set trap community by typing a proper
name. The default setting is public.
Notification Host IP - Set the IPv4 address of the host that
will receive the trap community.
Trap Timeout - The default setting is 10 seconds.
F
F
o
o
r
r
I
I
P
P
v
v
6
6
Available settings are explained as follows:
Item Description
Management Access
Control
Enable the checkbox to allow system administrators to login
from the Internet. There are several servers provided by the
system to allow you managing the modem from Internet.
Check the box(es) to specify.
Enable PING from the Internet - Check the checkbox
to enable all PING packets from the Internet. For security
issue, this function is disabled by default.
Access List
You could specify that the system administrator can only
login from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
IPv6 Address /Prefix Length- Indicate the IP address(es)