Operation Manual

Vigor120 Series User’s Guide
67
3
3
.
.
7
7
.
.
5
5
S
S
y
y
s
s
l
l
o
o
g
g
/
/
M
M
a
a
i
i
l
l
A
A
l
l
e
e
r
r
t
t
SysLog function is provided for users to monitor modem. There is no bother to directly get
into the Web Configurator of the modem or borrow debug equipments.
Enable (Syslog Access…) Check “Enable” to activate function of syslog.
Syslog Server IP The IP address of the Syslog server.
Destination Port Assign a port for the Syslog protocol.
Enable syslog message Check the box listed on this web page to send the
corresponding message of firewall, VPN, User Access,
Call, WAN, Modem/DSL information to Syslog.
Enable (Alert Setup…) Check “Enable” to activate function of mail alert.
Send a test e-mail Make a simple test for the e-mail address specified in this
page. Please assign the mail address first and click this
button to execute a test for verify the mail address is
available or not.
SMTP Server The IP address of the SMTP server.
Mail To Assign a mail address for sending mails out.
Return-Path Assign an e-mail address of another mailbox to accept all
returned messages if fatal problems occur at the recipient
mailbox.
The e-mail address typed here also acts as the Sender
address while Vigor sends out the alert e-mails.
Authentication Check this box to activate this function while using
e-mail application.
User Name Type the user name for authentication.
Password Type the password for authentication.
Enable E-mail Alert Check the box to send alert message to the e-mail box
while the modem detecting the item(s) you specify here.
Click OK to save these settings.