Operation Manual

Vigor120 Series User’s Guide
20
Settings
allows you type in IP address manually.
Obtain an IP address automatically – Click this button to obtain
the IP address automatically.
Modem Name – Type in the modem name provided by ISP.
Domain Name – Type in the domain name that you have assigned.
Specify an IP address – Click this radio button to specify some
data.
WAN IP Alias - If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use WAN
IP Alias. You can set up to 8 public IP addresses other than the
current one you are using. Notice that this setting is available for
WAN1 only. Type the additional WAN IP address and check the
Enable box. Then click OK to exit the dialog.
IP Address – Type in the private IP address.
Subnet Mask – Type in the subnet mask.
Gateway IP Address – Type in gateway IP address.
Default MAC Address Type in MAC address for the modem.
You can use Default MAC Address or specify another MAC
address for your necessity.
MAC Address – Type in the MAC address for the modem
manually.
DNS Server IP
Address
Type in the primary IP address for the modem. If necessary, type
in secondary IP address for necessity in the future.
After finishing all the settings here, please click OK to activate them.