Operation Manual

Vigor120 Series User’s Guide
19
After finishing all the settings here, please click OK to activate them.
M
M
P
P
o
o
A
A
MPoA is a specification that enables ATM services to be integrated with existing LANs,
which use either Ethernet, token-ring or TCP/IP protocols. The goal of MPoA is to allow
different LANs to send packets to each other via an ATM backbone.
To use MPoA as the accessing protocol of the Internet, select MPoA mode. The following
web page will appear.
MPoA (RFC1483/2684) Click Enable for activating this function. If you click Disable, this
function will be closed and all the settings that you adjusted in this
page will be invalid.
DSL Modem Settings Set up the DSL parameters required by your ISP. These are vital
for building DSL connection to your ISP.
Multi-PVC channel - The selections displayed here are
determined by the page of Internet Access – Multi PVCs. Select
M-PVCs Channel means no selection will be chosen.
Encapsulating Type - Drop down the list to choose the type
provided by ISP.
VPI - Type in the value provided by ISP.
VCI - Type in the value provided by ISP.
RIP Protocol Routing Information Protocol is abbreviated as RIP（RFC1058）
specifying how modems exchange routing tables information.
Click Enable RIP for activating this function.
Bridge Mode If you choose Bridged IP as the protocol, you can check this box
to invoke the function. The modem will work as a bridge modem.
WAN IP Network
This group allows you to obtain an IP address automatically and