Installation guide

VigorAccess Installation Guide
23
3
3
.
.
4
4
.
.
5
5
S
S
c
c
e
e
n
n
a
a
r
r
i
i
o
o
–
–
S
S
l
l
a
a
v
v
e
e
D
D
e
e
v
v
i
i
c
c
e
e
S
S
t
t
a
a
n
n
d
d
a
a
l
l
o
o
n
n
e
e
A master device connects to Internet through UP-G connector. Yet, a slave device also
can work alone without connecting the master device. For a standalone slave device,
please use UP1or UP2 as the channel to access Internet with Ethernet cable.
In the above picture, the user of PC-3 wants to use phone and access the Internet at the
same time; yet PC-1 and PC-2 just want to access the Internet through the Slave device.
As for the connection, please follow the steps below:
1. Connect PC-3 to number 9 of MDF-1, PC-2 to number 5 of MDF-1 and PC-1 to
number 1 of MDF-1 with Ethernet cable (or ? cable).
2. Connect the MDF-1 to Line port of the Slave device.
3. Connect the Phone port of the Master device to the matching connector (in this case,
it is number 9, be careful and not to misconnect) to MDF-2 which will be connected
to PSTN. This step is just useful for PC-3 for the user wants to call out through the
Master device.
4. Connect the Slave device and ISP with Ethernet Cable through UP-1 or UP-2 port
(also named UPLINK port).
5. With such connection, all the users of the PCs can access the Internet through
UPLINK connector of the Slave device. Yet only PC-3 can call out with a telephone
set directly.
The standalone Slave device can connect 24 ADSL CPE routers which supported by the
DB-21 cables. If you want to expand the usage for more users (connect more routers for
different users), we recommend you to purchase and add one Master device.