Installation guide

VigorAccess Installation Guide
13
LED Status Explanation
Green The speed for Ethernet is 1000Mbps when LNK
LED is on.
1000
OFF The speed for Ethernet is 10/100Mbps when LNK
LED is on.
Green The Ethernet is in full duplex mode when LNK LED
is on.
FDX
OFF The Ethernet is in half duplex mode when LNK
LED is on.
Green Blink: DSL board is Active.
ACT
OFF It will be off or solid on when the system is inactive.
Red DSL critical alarm is present.
CR
OFF No critical alarm is present to system.
Red DSL major alarm is present.
MJ
OFF No major alarm is present to system.
Yellow DSL minor alarm is present.
MN
OFF No minor alarm is present to system.
Green The DSL x port link status is up.
Blinking The DSL link is training.
DSLx
OFF The DSL x port link status is down.