Operation Manual

VigorNIC 132 Series User’s Guide

Available settings are explained as follows:

Item Description

Check to enable the Filter

Rule

Check this box to enable the filter rule.

Comments Enter filter set comments/description. Maximum length is 14-

character long.

Index(1-15) Set PCs on LAN to work at certain time interval only. You

may choose up to 4 schedules out of the 15 schedules

pre-defined in Applications >> Schedule setup. The default

setting of this field is blank and the function will always

work.

Clear sessions when

schedule ON

Check this box to clear the sessions when the above schedule

profiles are applied.

Direction Set the direction of packet flow. It is for Data Filter only. For

the Call Filter, this setting is not available since Call Filter is

only applied to outgoing traffic.

Note: RT means routing domain for 2nd subnet or other LAN.

Source/Destination IP Click Edit to access into the following dialog to choose the

source/destination IP or IP ranges.