User`s guide

VigorN65 User’s Guide

Country Region

Code

The available channels are differed from countries. It is restricted to

change. Here you can see the channel setting of the access point. For

example:

0: FCC (US, Canada, and other countries uses FCC radio

communication standards)

1: ETSI (Europe)

2: SPAIN

3: FRANCE

4: MKK

5: MKKI (TELEC)

6: ISERAL (Channel 3 to 9)

7: ISERAL (Channel 5 to 13)

No forwarding

among wireless

clients

Check this box and wireless clients will not be able to share data with

each other.

Hide SSID

Check this box and the SSID will not be broadcasted to the public.

Your wireless clients must know the exact SSID to be able to connect

to your computer. This option is useful to enhance security level.

Allow BW 40

MHz

Check this box to allow BW 40MHz capability.

Beacon(ms)

You can define the time interval that a beacon signal should be send.

Default value is 100. Do not modify this value unless you know what

will be affected.

TX Power

You can select the wireless output power here. Please select a proper

output power setting according to your actual needs. You may not

need 100% of output power if other wireless clients are not far from

you.

Idle Time

Select the idle time for the wireless access point. Default value is 300.

Do not modify this value unless you know what will be affected.

To save changes, click the Apply button. Or you can click Default to reset all values to

factory default value.