User`s guide

VigorN65 User’s Guide

The setup utility will expand:

Here are descriptions of System Config tab:

Item Name Description

Profile Name You can give this profile a name. Every profile needs a unique name.

SSID Please input the SSID of this access point. If you selected an access point

from the list, and its SSID is not hidden, the SSID will be filled

automatically; however, you can modify the SSID by yourself.

Network

Type

Please select the network type: Ad hoc or Infrastructure. If you’re

connecting to an access point, please select Infrastructure; for

point-to-point wireless connection (i.e. connecting to another computer

using Ad Hoc mode), please select Ad hoc here. If you selected an access

point from the list above, please keep this field unchanged.

Tx Power You can select the wireless output power here. If you’re not too far from

access point (good signal reception), you can select a lower output power

to save energy; for a distant access point, you can select a higher output

power. It’s suggested to select Auto to let setup utility decide the best